| Author |
Message |
FNJ
2010 SLF Tag Champ
Joined: Jun 07 2006
Posts: 12294
|
Every time I try to publish a video, half the screen is green. If I disable any codecs I get audio with no video.
Are there any simple, free programs that are similar? I don't need any complicated sony vegas bullshit.
|
|
|
  |
|
|
Douche McCallister
Moderator
Title: DOO-SHAY
Joined: Jan 26 2007
Location: Private Areas
Posts: 5672
|
You gotta toggle the galvatron reaction core, then after that you must go into the dik.4 files and transverse the alternator by changing the settings on the ultimate nullifier.
after you do that go into the googlebot folder, turn on buffer underrun protection (to stop a baroque cancel) and get the alpha countering settings. open that in notepad, scroll down about three fourths of the way, and look for a part that says something about a K.I.L.R.O.Y. protocol. You might have to double check this in double zeta settings. see if that's set to RX-78 or not, and copy paste that here. After that I'll tell you what you should do to get it working.
Also, make sure your speakers are set to "stereo".
Hope this helps!
|
|
|
 |
|
|
Alowishus
Joined: Aug 04 2009
Posts: 2515
|
| Douche McCallister wrote: |
You gotta toggle the galvatron reaction core, then after that you must go into the dik.4 files and transverse the alternator by changing the settings on the ultimate nullifier.
after you do that go into the googlebot folder, turn on buffer underrun protection (to stop a baroque cancel) and get the alpha countering settings. open that in notepad, scroll down about three fourths of the way, and look for a part that says something about a K.I.L.R.O.Y. protocol. You might have to double check this in double zeta settings. see if that's set to RX-78 or not, and copy paste that here. After that I'll tell you what you should do to get it working.
Also, make sure your speakers are set to "stereo".
Hope this helps! |
Hahahahahaha. What OS are you using and what version of Windows Movie Maker? I use Windows 7 but apparently there is compatibility problems with it. However i use it and i don't have any problems other than it crashes all the time.
|
|
|
|
|
|
GPFontaine
Joined: Dec 06 2007
Location: Connecticut
Posts: 11244
|
| FNJ wrote: |
Every time I try to publish a video, half the screen is green. If I disable any codecs I get audio with no video.
Are there any simple, free programs that are similar? I don't need any complicated sony vegas bullshit. |
What operating system do you run?
Do you have any other video editing software on your computer?
Have you installed any codec packs like K-Lite?
Which half of the movie is not showing?
|
|
|
 |
|
|
Sehkmaenzo
Joined: Jun 29 2010
Posts: 1818
|
That last question really makes a difference, or are you just messing with him? 
"How green was the screen?"
|
|
|
|
|
|
The Opponent
Title: Forum Battle WINNER
Joined: Feb 24 2010
Location: The Danger Zone
Posts: 3495
|
The last question does make a difference. If it's split horizontal, it's a source problem. If it's split vertical, it's either an interlacing or resolution problem.
|
 I'm not a bad enough dude, but I am an edgy little shit. I'll do what I can. |
|
|
|
|
Sehkmaenzo
Joined: Jun 29 2010
Posts: 1818
|
Oh, didn't know that, nevermind me then 
|
|
|
|
|
|
FNJ
2010 SLF Tag Champ
Joined: Jun 07 2006
Posts: 12294
|
| Douche McCallister wrote: |
You gotta toggle the galvatron reaction core, then after that you must go into the dik.4 files and transverse the alternator by changing the settings on the ultimate nullifier.
after you do that go into the googlebot folder, turn on buffer underrun protection (to stop a baroque cancel) and get the alpha countering settings. open that in notepad, scroll down about three fourths of the way, and look for a part that says something about a K.I.L.R.O.Y. protocol. You might have to double check this in double zeta settings. see if that's set to RX-78 or not, and copy paste that here. After that I'll tell you what you should do to get it working.
Also, make sure your speakers are set to "stereo".
Hope this helps! |
Now come on man, you know I tried that before posting!
I'm running vista home, don't know which movie maker (but can check when o go home). I believe I installed K-Lite, and some other divx one.
The bottom half is green, almost lime, and my speakers are set to stereo.
|
|
|
|
|
|
The Opponent
Title: Forum Battle WINNER
Joined: Feb 24 2010
Location: The Danger Zone
Posts: 3495
|
Uninstall all of your codecs and codec packs and use CCCP instead. Use the Insurgent on the same page to help you with the former.
|
I'm not a bad enough dude, but I am an edgy little shit. I'll do what I can. |
|
|
|
|
GPFontaine
Joined: Dec 06 2007
Location: Connecticut
Posts: 11244
|
| Sehkmaenzo wrote: |
That last question really makes a difference, or are you just messing with him?
"How green was the screen?" |
It does matter. In fact, the solution I found was based 50% on that information:
Suggested Solution:
http://www.bernzilla.com/item.php?id=884
|
|
|
|
|
|
FNJ
2010 SLF Tag Champ
Joined: Jun 07 2006
Posts: 12294
|
Im running WMM version 6.
also, i seem to have divx plus.
under the compatability tab in WMM, I only have the options of fucking with AVI compressor and DIVX decoder filter.
|
|
|
|
|
|
GPFontaine
Joined: Dec 06 2007
Location: Connecticut
Posts: 11244
|
|
|
|
|
FNJ
2010 SLF Tag Champ
Joined: Jun 07 2006
Posts: 12294
|
i already removed divx. should I remove the k-lite codec pack?
|
|
|
|
|
|
FNJ
2010 SLF Tag Champ
Joined: Jun 07 2006
Posts: 12294
|
i just googled and downloaded xvid. it doesnt do anything.
|
|
|
|
|
|
GPFontaine
Joined: Dec 06 2007
Location: Connecticut
Posts: 11244
|
| FNJ wrote: |
| i just googled and downloaded xvid. it doesnt do anything. |
Did you set the setting suggested in the link I posted?
|
|
|
|
|
|
SNESGuy
Title: El Duderino
Joined: Jul 31 2010
Location: Da D.C
Posts: 1831
|
| Douche McCallister wrote: |
You gotta toggle the galvatron reaction core, then after that you must go into the dik.4 files and transverse the alternator by changing the settings on the ultimate nullifier.
after you do that go into the googlebot folder, turn on buffer underrun protection (to stop a baroque cancel) and get the alpha countering settings. open that in notepad, scroll down about three fourths of the way, and look for a part that says something about a K.I.L.R.O.Y. protocol. You might have to double check this in double zeta settings. see if that's set to RX-78 or not, and copy paste that here. After that I'll tell you what you should do to get it working.
Also, make sure your speakers are set to "stereo".
Hope this helps! |
 Paybacks a bitch
|
|
|
|
|
|
FNJ
2010 SLF Tag Champ
Joined: Jun 07 2006
Posts: 12294
|
it originally wouldnt let me fuck with those settings. gave me an error message. I deleted it and downloaded it from somewhere else, and now it works beautifully. Thank you.
|
|
|
|
|
|
FNJ
2010 SLF Tag Champ
Joined: Jun 07 2006
Posts: 12294
|
| SnesGuy wrote: |
| Douche McCallister wrote: |
You gotta toggle the galvatron reaction core, then after that you must go into the dik.4 files and transverse the alternator by changing the settings on the ultimate nullifier.
after you do that go into the googlebot folder, turn on buffer underrun protection (to stop a baroque cancel) and get the alpha countering settings. open that in notepad, scroll down about three fourths of the way, and look for a part that says something about a K.I.L.R.O.Y. protocol. You might have to double check this in double zeta settings. see if that's set to RX-78 or not, and copy paste that here. After that I'll tell you what you should do to get it working.
Also, make sure your speakers are set to "stereo".
Hope this helps! |
Paybacks a bitch |
Not really. It was surprisingly helpful advice.
|
|
|
|
|
|
GPFontaine
Joined: Dec 06 2007
Location: Connecticut
Posts: 11244
|
|
|
|
|
|
|
